Nice. Your blank looks like it might be a cousin to my "Nebulish" handle you made for me a while back...
Troy Tools Custom Brush Handles
- Thread starter TroyTools
- Start date
TroyTools
Member
Similar, but all slightly different colours, and no transparent in this one, all opaque
TroyTools
Member
Back in the workshop again after a couple months off with family commitments. Now I'm madly trying to catch up on work that piled up while I was busy, also doing a few things for myself too of course.
Here is a Buffalo horn hybrid with Gold resin I used to backfill the interior cavity of the horn. 26mm
Here is a Buffalo horn hybrid with Gold resin I used to backfill the interior cavity of the horn. 26mm
Errol
Razor Review Guru
Great work. I always wondered how a combination of buffalo horn and resin would work. Looks positive now. I do have a few flat sections for you to experiment with if you would like them.Back in the workshop again after a couple months off with family commitments. Now I'm madly trying to catch up on work that piled up while I was busy, also doing a few things for myself too of course.
Here is a Buffalo horn hybrid with Gold resin I used to backfill the interior cavity of the horn. 26mm
Bladerunner7
Member
StunningBack in the workshop again after a couple months off with family commitments. Now I'm madly trying to catch up on work that piled up while I was busy, also doing a few things for myself too of course.
Here is a Buffalo horn hybrid with Gold resin I used to backfill the interior cavity of the horn. 26mm
TroyTools
Member
Hi All, I'm having a half price Merry Christmas sale of my existing pre-made brushes and handles.
I'm letting all these in the pictures go at half price, I've had them all long enough and it doesn't make sense to keep making more when these are all taking up space in the boxes I need for more new brushes.
This half price sale will end Midnight on Christmas Eve 2025.
Bare handles are $50 each plus Express Post $15. (most of these don't have a maker's medal installed yet so choice is open on Brass or Aluminium medal). For another $10 I will fit a suitable knot from my stock of synthetic or boar knots if you wish me to complete the brush for you.
Note: I am running low on makers medals so get in quick if that's what you're after. More have been ordered, but it takes a while to get them.
Completed synthetic or boar brushes are $60 each plus Express Post $15.
I won't be modifying any of the completed brushes at this price, they come as they are.
I can't modify pictures on this forum but I can delete brushes from the pics on my facebook page as brushes sell and become unavailable.
https://www.facebook.com/TroyCraftCustomShavingBrushes/
PM me for a bargain.
Quote the picture number (top left corner of each pic, which row, green one 3rd from the left, etc...)
If you want to send me a knot to fit in a handle for you, that's good too. Half price purchase of the handle will still apply.
Enjoy the eyecandy otherwise
I'm letting all these in the pictures go at half price, I've had them all long enough and it doesn't make sense to keep making more when these are all taking up space in the boxes I need for more new brushes.
This half price sale will end Midnight on Christmas Eve 2025.
Bare handles are $50 each plus Express Post $15. (most of these don't have a maker's medal installed yet so choice is open on Brass or Aluminium medal). For another $10 I will fit a suitable knot from my stock of synthetic or boar knots if you wish me to complete the brush for you.
Note: I am running low on makers medals so get in quick if that's what you're after. More have been ordered, but it takes a while to get them.
Completed synthetic or boar brushes are $60 each plus Express Post $15.
I won't be modifying any of the completed brushes at this price, they come as they are.
I can't modify pictures on this forum but I can delete brushes from the pics on my facebook page as brushes sell and become unavailable.
https://www.facebook.com/TroyCraftCustomShavingBrushes/
PM me for a bargain.
Quote the picture number (top left corner of each pic, which row, green one 3rd from the left, etc...)
If you want to send me a knot to fit in a handle for you, that's good too. Half price purchase of the handle will still apply.
Enjoy the eyecandy otherwise
TroyTools
Member
And now for something outside my normal wheelhouse, but not outside my skillset and tools (apparently)
Buffalo horn and 316 stainless steel fittings, custom made to specs provided by @Errol for one/some of his magnificant razors. Started by turning up a few mandrels to the required diameters to hold all the small parts on the lathes, and then got to it.
Two tops were provided to accomodate modern 5mm threads, and #10-32tpi UNF for vintage threaded heads. A fun little project made to the tightest tolerances I could manage and still provide ease of assembly / dissasembly fitment. I also had a big piece of buffalo horn just begging to be cut up and made into something unique, so a brush holder it is. Thank you again for the box of horns Errol, looking forward to the next one (I still have the unused 316
)
)Buffalo horn and 316 stainless steel fittings, custom made to specs provided by @Errol for one/some of his magnificant razors. Started by turning up a few mandrels to the required diameters to hold all the small parts on the lathes, and then got to it.
Two tops were provided to accomodate modern 5mm threads, and #10-32tpi UNF for vintage threaded heads. A fun little project made to the tightest tolerances I could manage and still provide ease of assembly / dissasembly fitment. I also had a big piece of buffalo horn just begging to be cut up and made into something unique, so a brush holder it is. Thank you again for the box of horns Errol, looking forward to the next one (I still have the unused 316
)
TroyTools
Member
That's no good, click this link to go to my Facebook page, you'll see them there.1. Images are not visible for me on my mobile
2. What do you have in large knot and handle sizing?
I have a few 26 & 28mm boar brushes in big handles, plus some regular handles sized for 26, 28 , 30mm knots.
I have boar knots in 26 and 28mm, and Tuxedo in 24, 26, 30mm, Plissoft 24, 26, 28, 30mm, Snow Leopard in 26, 28mm, Cashmere in 28mm, Timberwolf 26, 28mm.
Let me know if you still can't see the pics, I can email them to you if that's what's needed.
That sounds like something for me. If they're still there on 1st Jan, that might suit me just fine. Obviously not expecting a sale price with that delay though: I snooze, I lose. That's how it works, and I'm fine with that.
Bladerunner7
Member
keen on having a look at these Troy. and those razor handles are gorgeous. You have to make. few more in wood or resin with metal at both ends. Very cool mate.
Beautiful! congratulations to you both, especially love the custom brush holder, very unique.And now for something outside my normal wheelhouse, but not outside my skillset and tools (apparently
Buffalo horn and 316 stainless steel fittings, custom made to specs provided by @Errol for one/some of his magnificant razors. Started by turning up a few mandrels to the required diameters to hold all the small parts on the lathes, and then got to it.
Two tops were provided to accomodate modern 5mm threads, and #10-32tpi UNF for vintage threaded heads. A fun little project made to the tightest tolerances I could manage and still provide ease of assembly / dissasembly fitment. I also had a big piece of buffalo horn just begging to be cut up and made into something unique, so a brush holder it is. Thank you again for the box of horns Errol, looking forward to the next one (I still have the unused 316
Bladerunner7
Member
This Bush is superb as well. Very unique - The Black Caramel.And now for something outside my normal wheelhouse, but not outside my skillset and tools (apparently
Buffalo horn and 316 stainless steel fittings, custom made to specs provided by @Errol for one/some of his magnificant razors. Started by turning up a few mandrels to the required diameters to hold all the small parts on the lathes, and then got to it.
Two tops were provided to accomodate modern 5mm threads, and #10-32tpi UNF for vintage threaded heads. A fun little project made to the tightest tolerances I could manage and still provide ease of assembly / dissasembly fitment. I also had a big piece of buffalo horn just begging to be cut up and made into something unique, so a brush holder it is. Thank you again for the box of horns Errol, looking forward to the next one (I still have the unused 316
