Weekly Razor Review

Wilde & Harte Osterley (England)



This Wilde & Harte Osterley was purchased from Bullgoose Shaving this year, so is from the current production. An email to Bullgoose confirmed that the head used on all W&H DE models is the same, however the head of the Eltham does have scalloped edges. When I pushed the buy button, I hadn’t realized just how different the head of the Wilde and Harte Osterley was to the older Eltham model I tested last week; this now gives me the opportunity to compare the older W&H model head against the current offering on a similar profile handle. The Osterley’s head features a plate with a flat back and a raised square section on its top; blade clamping is taken care of by the cap mating against this raised section, however clamping occurs well inside the extremities of the cap. Like the Eltham, the handle features a bulbous section at the forward end and a slender tail section, but the sectional profile of the handle is round. Very light machine marks are present on the underside of the cap and the top of the plate; this machining has been so well executed that the marks almost look like a satin finish at a quick glance; all remaining surfaces of the Osterley are highly polished.

It always has me puzzled when the blades supplied with a new razor are Feather. Many users are simply frightened of Feather blades, but I associate them with mild performing heads. In for a penny, in for a pound, look out Feather blade you’re my first choice for the Osterley. Many blades, and that includes this Feather throw up some weird and less than wonderful results on their initial passes, but once they get over that initial startup period deliver true results. There was a little surprise when the Osterley delivered a shave of slightly under Karve CB Level #D efficiency and the shave was smooth as silk. One thing that was evident between the blades was their level of performance, so I would recommend trying a variety of blades before settling on a favourite in this razor. With muscle memory of the right hand becoming accustomed to finding a usable hold on the strangely profiled Osterley handle, I had a lot less trouble clasping the handle then with the Eltham, however I am still not a fan of this handle. This razor delivers a great shave; I could live with it.

Blades Used – Feather and Gillette Platinum Plus

Material –Stainless Steel

Blade Tab - Covered

Weight – 110.7g

Head Width – 43.46mm

Handle Length – 94.48mm

Handle Diameter – 16.38mm

Availability – Bullgoose and Wilde and Harte

Final Word – Stunning looks
 
Hey @Errol, another razor for you to review in 2026, RazoRock Recurve.

O2ZFLvi.jpeg

a7ZiCBP.png

1lHuToe.png
 
Lambda Ares V2 Ti (Greece)



Since my very first purchase of a Lambda razor, which just happened to be their very first released bronze Ares (V1), I have been awe-struck by the quality and presentation of the Lambda product. Not only is every razor finished to a mirror polish, but it comes in a solid mahogany case with white felt inserts and quality brass hinges and fittings, this time with a deep grey stain. For this purchase I was searching for the titanium version. It took a while for the titanium version to be released, but I was there waiting when word came through that the titanium version was available. An end on view of the head shows the profile is not far off being a full semi-circle. On its own the cap looks to be a fairly standard affair, but the extra-long comb contributes to the visual sense of the semi-circle. Round blade posts on the cap protrude completely through the plate and the wide flats on the edge of the cap mate to the convex surface of the plate. Proudly displayed on each end of the plate is the Lambda trademark (λ). Throughout its evolution, one thing has remained constant, the handle design of the Ares still represents the sculptured columns of the state buildings of ancient Greece, it certainly has presence and provides positive grip. Adding to the quality features of the Ares V2 titanium, the thread contact is precise and has the smoothest engagement of any titanium razor it has been my pleasure or displeasure to use.

While I was in awe of the performance of the Stainless Steel Lambda Ares V2, I enjoyed the titanium even more. Efficiency is down noticeably to the stainless steel V2 to under Karve CB level #D, the reduction in efficiency has delivered a smoother and more comfortable shave, if that is possible. Lambda have done a creditable job in polishing and smoothing all sharp edges from the teeth of the comb, they are barely noticeable as they glide over the face. This is one razor that must be used to be appreciated for what it is, an outstanding razor. Make way on the top shelf, here comes the Lambda Ares V2 Ti.

Blades Used – Gillette Platinum and Willy’s

Material – Titanium Gr 5

Blade Tab – Slightly exposed

Weight – 57.4g

Head Width – 42.03mm

Handle Length – 95.01mm

Handle Diameter – 11.41mm

Availability – Lambda

Final Word – Quality all the way
 
Lambda Athena Ti (Greece)



Coming into possession of the Athena Ti was one whole lot less stressing than my acquisition of the Ares Ti V2, I simply opened the Lambda website, and it was available. Even though I’ve seen it previously, I’m still intrigued by how the Athena channels its waste lather out through the end of the plate; grooves machined into the top of the plate allow the waste lather to be forced rearwards towards a channel running lengthwise across the plate, and the lather simply disperses out the end of the plate. Round blade posts on the cap mate into blind holes in the top of the plate. If you’re starting to get the impression that the top of the plate is congested with machining, it is, it’s a busy place and very unlike just about every other plate. Undoubtedly, the centrepiece of the Athena is the handle, a torpedo shape with four flats machined at the forward section and a mirror polished except for the flats and a small length of blasted finish towards the end of the handle. While the thread engagement is not as good as that of the Ares V2 Ti I used last week, it is still a credit to the machinist responsible. As with all Lambda razors, the Lambda trademark (λ) is displayed proudly on both ends of the plate. To complete its presentation, every part of the head is mirror polished without a machine mark visible anywhere. And that presentation box, how could I not mention it, a piece of artwork.

There was no way I was expecting the Athena Ti to be more efficient than the bronze version, but it was, only marginally, but noticeable. Efficiency was on the higher side of Karve CB level #D and the blade feel so well proportioned. The Athena Ti is not a feather weight; it is at the higher end of weights for a titanium razor, but it is a weight that suits this razor. To say I am impressed with the performance of the Athena Ti is an understatement, I thoroughly enjoyed using the Athena Ti, brilliant.

Blades Used – Wizamet Polsilver and Gillette Minora

Material – Titanium Gr 5

Blade Tab – Slightly exposed

Weight – 69.7g

Head Width – 41.97mm

Handle Length – 94.95mm

Handle Diameter – 15.01mm

Availability – Lambda

Final Word – Fan-bloody-tastic
 
Lambda Athena Ti (Greece)



Coming into possession of the Athena Ti was one whole lot less stressing than my acquisition of the Ares Ti V2, I simply opened the Lambda website, and it was available. Even though I’ve seen it previously, I’m still intrigued by how the Athena channels its waste lather out through the end of the plate; grooves machined into the top of the plate allow the waste lather to be forced rearwards towards a channel running lengthwise across the plate, and the lather simply disperses out the end of the plate. Round blade posts on the cap mate into blind holes in the top of the plate. If you’re starting to get the impression that the top of the plate is congested with machining, it is, it’s a busy place and very unlike just about every other plate. Undoubtedly, the centrepiece of the Athena is the handle, a torpedo shape with four flats machined at the forward section and a mirror polished except for the flats and a small length of blasted finish towards the end of the handle. While the thread engagement is not as good as that of the Ares V2 Ti I used last week, it is still a credit to the machinist responsible. As with all Lambda razors, the Lambda trademark (λ) is displayed proudly on both ends of the plate. To complete its presentation, every part of the head is mirror polished without a machine mark visible anywhere. And that presentation box, how could I not mention it, a piece of artwork.

There was no way I was expecting the Athena Ti to be more efficient than the bronze version, but it was, only marginally, but noticeable. Efficiency was on the higher side of Karve CB level #D and the blade feel so well proportioned. The Athena Ti is not a feather weight; it is at the higher end of weights for a titanium razor, but it is a weight that suits this razor. To say I am impressed with the performance of the Athena Ti is an understatement, I thoroughly enjoyed using the Athena Ti, brilliant.

Blades Used – Wizamet Polsilver and Gillette Minora

Material – Titanium Gr 5

Blade Tab – Slightly exposed

Weight – 69.7g

Head Width – 41.97mm

Handle Length – 94.95mm

Handle Diameter – 15.01mm

Availability – Lambda

Final Word – Fan-bloody-tastic
This has to be one of the most beautiful razors out there
 
Back
Top